Empennage fairings part VII

Still not too much time to work on the project lately. I did have a chance to reinforce the balsa ribs on the horizontal stabilizer tip fairings with a mixture of epoxy and flox, and to fit and install the 4-40 nutplates that will hold the fairings on.

I mixed up the usual batch of micro filler and smoothed out the transition between the tip fairings and the stabilizer, with an extra blob at the nose to allow a perfect fit after it's all sanded down later. I also put a big glob of filler on the outboard corners – a lot of this will get sanded off, but what remains will be the the first step of building up the tip fairings to match the contour of the elevator tips.