Today I prosealed the trailing edge on the new rudder. I first squirted some blobs of proseal into the trailing edge of each pair of stiffeners, to guard against future cracking.
Then I buttered up the AEX wedge with a very thin layer of sealant…
…and inserted it into the rudder. The clecoes squeezed out a bead of proseal, which I wiped off.
Now to let it cure for a while. Upon reviewing these photos, it appears that the proseal I used here is a little lighter in color than the stuff I used on the fuel tank covers. Maybe I didn't get it mixed quite enough? It will probably take a bit longer to cure, but that's okay as long as it eventually does.
